componente flow control byo - DVG Automation

BYO Gas over oil Actuators Series

BYO actuators are used for on/off control of any natural gas transmission ball or plug valve by means of a high-pressure natural gas or nitrogen actuator supply.
DVG introduce a new generation of patented mechanism which minimizes wearing effect on all loaded & sliding parts, thus extending overall lifespan.

Specifications

  • Quarter turn SCOTCH YOKE Mechanism
  • Double Acting
  • Symmetric or canted yoke design
  • Sweet Gas or Sour Gas supply (H2S<=6% ) up to 105 BARG
  • Output Torque Up to 13.000 Nm
  • Gas Over Oil tanks, certified according to International Standard and
  • Customer request
  • Hydraulic manual override
  • Standard temperature range -30°C +90°C, Low temperature version -60°C +90°C
  • PED 2014/68/UE Compliant
  • ATEX 2014/34/UE Compliant
  • IP67M, NEMA 4, 4x & 6 as minimum
  • Corrosion resistant cylinder
  • Protected travel stops are standard
  • Actuator in carbon steel – NO Aluminum NO Cast Iron
  • Pressure retaining components 3.1 Certified according to EN10204
  • Basic control system including Local & Remote control
  • Torque limiting device
  • ESD function for low or high pressure
  • ESD function for electric supply failure to SOV
  • Line Break System
  • Opening prevention for high differential pressure across the valve

Key Features & Advantages

Operating Range
  • The Double-acting models are available with individual test and minimum output torque ranging from 40 Nm (350 lb-in) to 13,000 Nm (115,059 lb-in)
  • Operating pressure ranges between 15 barg (290 psig) and 105 barg (1600 psig)
  • Standard design construction allows operating temperature from -30 degC (-20 degF) to +93 degC (+199 degF)
  • Low Temperature extended operating range down to -60 degC (-76 degF)
Supply medium

Sweet Gas – Nitrogen. Special versions are available for Sour Gas or H2

Scotch Yoke

Patented Mechanism which reduced mechanical clearances between cylinder piston rod and driving module.

Mechanism Guide System

Patented Dual Guide Bar hard chromium plated to minimize driving block swing extending piston rod lifespan under heavy load &/or continuous modulating duty.

Symmetric or canted yoke

BY Series is available with either symmetric or canted yoke design depending on valve torque profile demand.

Swept Volume

Reduced gas consumption with higher efficiency

Water ingress protection

Totally enclosed and weather-proof actuator center-body is engineered to meet IP66, IP67 IP67M and NEMA 4 & 4X specifications

Materials

Cylinder Tube & all structural parts are manufactured in carbon steel material:
no cast/grey iron or aluminum. All pressure containing part are supplied with 3.1 certificate according to EN10204. Designed according to PED (97/23 CE) directive . Cylinder tube is internally nickel-plated lined (minimum 25µm). Nickel-plating layer can be increased upon request.

Seal

Teflon ring with external charging O-ring and internal sealing O-ring prevents sticking phenomena after prolonged operation-less period and ensures reduced hysteresis and high sensitivity.

Bearing

Dual piston PTFE sliding guide. Yoke arm & shaft are mounted with steel Teflon coated bushing to minimize wearing effect and show higher sensitivity

Optional Features

Mounting Pad

Accessory mounting pad allows dual side mounting do not require fixing modification in case of rear side assembly.

Manual Override Option

DVG Automation BYO series can be supplied with hydraulic manual override system. Power is provided by operation of local manual hydraulic hand pump.
Open and close action can be selected by means of a directional control valve. Hydraulic manual override by means of two separate hand pumps (1 for open and 1 for close) is available.

Catalogues and Media

Certifications & Degree
  • Document
Manuals
  • Document

Write to us

DVG Automation Spa

It is important for us to reach you and understand your needs. Do you have any questions? Fill out the contact form or write to us. We will get back to you as soon as possible.

SALES

Write to us sales@dvgautomation.it

AFTERSALES

Write to us aftersales@dvgautomation.it